November 24, 2011

February 13, 2011

Sabbatical

0

You might have noticed that I haven't been posting new cards nor techniques for a looong time now...
But I found out I was pregnant back in September 2010...was sick for 3 months...got better...and I'm starting to get tired again in this last trimester.

Our webstore is still working (and going through some changes!), but I'm afraid I'll have to postpone new images' releases until later this year...since my helpers (my Sheltie and my Ragdoll) spend most of the day sleeping due to the weather. =)

Thank you!

September 06, 2010

September 03, 2010

August 05, 2010

June 21, 2010

Technique #12: Two-Tone Stamping

0


Stamps: PO-B46 Starfish Small and PO-B48 Starfish 2

This technique gives your stamping images more depth...all you need is two ink pads of the same color, but different shades (a lighter and a darker shade).

With a stamp image of your choice, ink the stamp with the lighter color first. We used VersaMagic Aegean Blue for the sample above.
With the darker ink (
VersaMagic Ocean Depth), ink only the edges of the image.
Then, stamp on cardstock and check out the results!

You can also use markers instead of ink pads!

June 08, 2010

May 31, 2010

May 29, 2010

May 21, 2010

Project #10: Embossed Magnets

0


1. Stamps:
KI-A20 Klimt Swirls
Sentiment (Inkadinkado)

2. Ink Pads:
Memento Tuxedo Black (Tsukineko)
VersaMark Dazzle Frost

3. Others:
UTEE (Ultra Thick Embossing Enamel) by Ranger
Heat Gun
Stampboard
Silver Leafing Pen (Krylon)

Doesn't your fridge love some fancy magnets?
Try these using the supplies listed above.

All you have to do is:

1. Ink the Stampboard (or a piece of unfinished wood) with VersaMark and heat emboss with UTEE of your choice.
Repeat 1 or 2 more times.

2. While the last layer is still hot, stamp a image of your choice and press it down.
Leave the stamp until the UTEE cools down. Then, gently remove the rubber stamp.

3. Ink and stamp a sentiment.

4. With the silver leafing pen, paint the sides of the Stampboard for a finished look.

P.S. You may paint your Stampboard (or piece of unfinished wood) before you start the embossing process...depending on the pressure you use, your background might show up like in the copper magnet, which was painted green (magnet on the left).

May 16, 2010

May 08, 2010

April 28, 2010

Vacation Mode

0

OK!
I'm officially on vacation mode...
I have a week off from my full-time job...so, I'll take a week off from my "part-time" job, too! =)

If you purchase any items from Stamprints {Art Stamps} during April 28th and May 5th, please note that they will be shipped on May 6th!!!

Thank you!

April 24, 2010

April 21, 2010

Technique #10: Masking

0

This is what you'll need:
1. Stamps:
WS-A14 Sheep, LS-A31 Cross Sketch
2. Ink Pads: Memento Tuxedo Black, Coffee Bean and New Sprout (Tsukineko)
3. Card Stock
4. Scissors
5. and last, but not the least, a Post-It note.


A. Stamp the first image on the left side of the panel. Then, without re-inking the stamp, stamp it on the top of a Post-It note (try to stamp some of the image on the sticky part).

B. Cut the Post-It image out and place it on the first image of the panel, as shown below. We left the legs out because they wouldn't show up in the final card, but you can also cover them, if desired.

C. Stamp the second sheep, overlapping a little bit on the first one.


D. Cover the second sheep with the cut out and stamp a third sheep.


To view the final card, click HERE.

April 13, 2010

April 09, 2010

Happy Belated Easter!!!

0


1. Stamps: WS-A14 Sheep, LS-A31 Cross Sketch, Studio G
2. Ink Pads: Memento Tuxedo Black, Coffee Bean and New Sprout (Tsukineko)
3. Others: Border Punches (EK Success), Sticker, Patterned Papers (S.E.I. and 7gyspies), card stock.

Well, well...I was supposed to post this card before Easter...
But I've been sooo sick...
So, here it is...
Happy Belated Easter!!! =)

March 26, 2010